Physical properties: | Chemical Name | Lithium Boron Alloy chip | |||||||||
Molecular formula: | Li,B | ||||||||||
Phase composition: | Li7B6 + Li | ||||||||||
Melting point: | ≥600℃ | ||||||||||
Grade: | Li55, Li60, Li65, Li70 | ||||||||||
Chemical Composition: | |||||||||||
Grade | Chemical content(weight)/% | ||||||||||
Li | B | ||||||||||
Li 55 | 55±2 | Remainder | |||||||||
Li 60 | 60±2 | Remainder | |||||||||
Li 65 | 65±2 | Remainder | |||||||||
Li 70 | 70±2 | Remainder | |||||||||
Size | The dimensions and tolerances are as follows, and the specific specifications are customized according to customer requirements.(Unit:mm) | ||||||||||
Thickness | Tolerance | ||||||||||
0.1~0.3 | ±0.01 | ||||||||||
>0.3~0.5 | ±0.02 | ||||||||||
>0.5~1.0 | ±0.03 | ||||||||||
●Width tolerance:+(Width X 1%)mm~2mm。 | |||||||||||
● Diameter tolerance:±0.02mm | |||||||||||
Performance introduction: | Compared with the currently widely used lithium-silicon alloy, the unit cell assembled with lithium-boron alloy as the anode material has better performance in both the highest voltage and the discharge working time. Under different loads, the maximum voltage of the unit cell is increased by 0.10~0.27V compared with the lithium-silicon alloy, and the discharge time is extended by 11.4%~78.1%. | ||||||||||
Appearance & Quality: | ●The surface of the product should have metallic luster without inclusions, holes and pits. | ||||||||||
● The edges of the product should be trim and without cracks. | |||||||||||
● Slight extrusion stripes are allowed on the surface of the product. | |||||||||||
Packaging: | ● In the drying room, put the product into a metal can or aluminized polyester pouches that has been dried for more than 24H, and fill it with 99.999% dry argon. | ||||||||||
● The outer packaging is packed in corrugated cardboard boxes with more than 5 layers or steel drums, and the inner is tightly stuffed to prevent it from moving. | |||||||||||
Safety/Storage: | ● During the transportation of the product, it should be fireproof and moisture-proof, no violent collision, and the drums should not be rolled on the ground. | ||||||||||
● The product should be stored in a rainproof, clean, dry, non-corrosive and a well-ventilated environment. It is strictly forbidden to store in the open air. | |||||||||||
● The product’s guarantee period is 12 months from the date of production. | |||||||||||
Performance comparison of three lithium alloys | |||||||||||
Lithium alloy | Potential compared with pure lithium (mV) | Total lithium content(%) | Open circuit voltage (FeS2/V) | Maximum working current Density (A/cm2) | proper temperature(℃) | (As the anode of thermal battery) physical state | Specific capacity (Ah/g) | ||||
LiAl | ~300 | 21±2 | 1.77 | 0.5 | ~700 | powder | 0.66 | ||||
LiSi | ~270 | 44±2 | 1.92 | 2 | ~730 | powder | 1.29 | ||||
LiB | 0~100 | 50-75 | 2.0~2.3 | 8 | ≥900 | sheet | 2.17 |

Search
Product Classification
Application Classification
China Energy Lithium Co., Ltd
Company Tel:86-22-59832337,59832338,59832339
Sales Tel:86-22-59816838,59816832,59816829
FAX:86-22-59816836 E-mail:cel@cellithium.com
Company address: No. 100, the 9th Avenue of Xinye, West TEDA, Tianjin, China.
©Copyright ©2009 CEL All rights reserved 版权所有 天津中能锂业有限公司 津ICP备19002247号